IB-SL515(SY-CL)-WC-E-032505
PRECAUTIONS
14
On Operation
•
If the player is brought directly from a
cold to a warm location, or is placed in
a very damp room, moisture may
condense on the lens inside the CD
player section. Should this occur, the
player will not operate properly. In this
case, remove the CD and wait about an
hour for the moisture to evaporate.
On Placement
•
Do not leave the player in a location
near a heat source, or in a place subject
to direct sunlight, excessive dust or
mechanical shock.
•
Do not place the player on an inclined or
unstable place.
•
Do not place anything within 1 inch of
the back of the cabinet. The ventilation
holes must not be covered for the player
to operate properly and prolong the life
of its components.
•
If the player is left in a car parked in the
sun, be sure to choose a location in the
car where the player will not be subjected
to the direct rays of the sun.
•
Since a strong magnet is used for the
speakers, keep personal credit cards
using magnetic coding or springwound
watches away from the player to prevent
possible damage from the magnets.
•
This CD player is designed to be played
on a stable no vibration position. If you
bump the set during CD play, the music
will stop or skip for a few seconds. This is
normal for this type of player.
On Safety
•
As the laser beam used in the CD player
section may be harmful to the eyes, do
not attempt to disassemble the cabinet.
Refer servicing to qualified personnel
only.
•
Should any solid object or liquid fall into
the player, unplug the player, and have
it checked by qualified personnel before
operating it any further.
Notes on CDs
•
Before playing, clean the CD with a
cleaning cloth. Wipe the CD from the
center out.
•
After playing, store the CD in its case.
If there is a scratch, dirt or fingerprints
on the CD, it may cause a tracking error
or skipping.
•
Do not stick paper or stickers on the CD,
nor scratch the CD.
•
Do not expose the CD to direct
sunlight or heat sources such as hot air
ducts, nor leave it in a car parked in direct
sunlight as there can be a considerable
rise in temperature inside the car.
•
Do not use solvents such as benzine,
thinner, commercially available cleaners
or anti-static spray intended for vinyl LPs.
MAINTENANCE
Cleaning the Lens
If the lens becomes dirty, it may cause a
skipping of sound during CD operation.
Clean with a commercially available lens
cleaner and blower.
Cleaning the Cabinet
Clean the cabinet, panel and controls with a
soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent,
such as alcohol or benzine.
IB-SL515(SY-CL)-WC-E-032505.pmd 5/17/2005, 9:07 AM15