Filter
Top Products
STEALTH FEATURES
DIGITAL TAPE LOOP
The Tape output is used as a direct digital output for a
digital recording system. The digital source you wa.nt to
re.cord is selected by:the Input switch. To listen to the
clig~ital source select S:ource on the Source/Monitor.
switch. To listen.to th6 Tape output during or after the.
recording select Monitor on the Source/Monitor switcla.
NOTE: The Tape input can also be used as an additional
source input.
CAUTION: The Tape output is a dig!tal signal and can
not be used as an analog output to clrlve front end compo-
nents such as a preampfifier.
PHASE SWITCH
The Phase Switch can reverse output phase. In some
studio recordings the master tape was recorded out of
phase, creating unusually poor sounding recordings..The
STEALTH can reverse the normal 0 degree.output.plaase
180 degrees to correct for this anomaly. Utilizing tlae
Phase Switch can, in some instances, restore lif6 to a
previously dull sounding recording.
EMPHASIS LED
You will notice that some discs, or tracks within a disc,
activate the Emphasis LED. This signifies that the re-
corded material had emphasis filtration used during the
recor.ding process. Emphasis is a recording industry
equalization network, similar to phono RIAA equaliza-
tion, intended for noise reduction.
8