Krell Industries MD-20 Turntable User Manual


 
Q. Due to the exposed nature of the laser assembly is
there a possibility of damage through laser radiation?
A. No. There is an optical sensor under the CD when it is
positioned on the transport hub. This allows the MD-20
to prohibit the laser from turning on when it is not cov-
ered with a CD.
a~I own many CDs that have CD Rings on them. Am I
le to use these discs with the MD-20?
A. Yes, The MD-20 will accept discs with :’CD Rin.gs".
Due to their very low mass, they will not damage the
MD-20’s transport. While we can neither affirm nor deny
the b.enefits derived from the use of CD Ring.s, we do not
fee! that any type of disc equilibrium device is require.d
with the MD-20 when properly used with our CD Stabi-
lizer.
CAUTION: We strongly advise against the use of any
type of additional disc stabilizer. These items add too
much mass to the laser servo system and may burn out
the drive.
Q. Do you recommend the use of Cones or other damp-
ing feet with the MD-20?
A. Due to the extraordinary rigidit.y of our machining and
internal damping, we do not fgel that the MD-20 requires
additional rn.ass co.upling or isolation. If you wish t.o use
an atter-market isolation device you may do so without
fear of dam. agingthe MD-20. Any device which affixes
permanently to t-he chassis or requires a breach of the
external chassis will void the warranty.
NOTE: Before any type of after market device is to be
utilized in conjunction with the MD-20, please consult
your dealer or the Krell staff for assistance.
Q. Can I use more than one digital output at the same
time?
A. Yes, The MD-20 can drive up to four different digital
to analog converters.
Q. Will the MD-20 play CD singles?
A. Yes, the MD-20 will play CD singles.
17