Filter
Top Products
3. Connect your digital interlink between the transport ,
and digital-to-analog converter, if not already connectecl.
4. Select a digital source and press the TimeSync button
on the front of your digital-to- analo~ converter. The
corresponding led will-illuminate indicating the
TimeS-ync is locked. Should the TimeSync-LED flash,
tlais means the TimeSync clock has not locked and. re-
quires, resetting. Select any other digital input.on tlae
digital-to-analog converter and then reselect the input,
you. wisla to use. The TimeSync LED will now be steacly
and the clock will be locked.