Krell Industries KPS 28c Stereo Amplifier User Manual


 
Unpacking Placement
1. Open the shipping box and remove the top
layer of foam. You see these items:
1 KPS 28c
1 AC power cord
1 12 VDC (12 Volt trigger)
remote cable link
1 1.25 amp slowblow fuse
1 T-10 Torx wrench
1 KPS 28c remote control
2
AAA size 1.5 Volt batteries
1 packet containing the Owner’s
Reference and the Warranty
Registration Card
2. Carefully remove the unit and accessories
from the shipping box. Remove the foam
end caps and protective plastic wrap from
the KPS 28c.
Notes
ff any of these items are not included in the
shipping box, please contact your authorized
Krell dealer, distributor, or Krell for assistance.
Save all packing materials, ff you ship your KPS
28c in the future, repack the un# in its original
packaging to prevent trans# damage. See
Return Authorization Procedure, on page 16,
for more information.
Before you install the KPS 28c into your sys-
tem, review the following guidelines to choose
the location for your component. This will facili-
tate a clean, trouble-free installation. The KPS
28c does not require a special rack or cabinet
for installation. For the dimensions of the KPS
28c, see Specifications, on the back cover.
The KPS 28c requires at least two inches (5 cm)
of clearance on each side and at least two inch-
es (5 cm) of clearance above the component
provide adequate ventilation. Installations inside
cabinetry may need extra ventilation.
Note
The KPS 28c incorporates an advanced sus-
pension system and does not require addition-
al mass coupling or isolation. You may experi-
ment with feet or cones as long as they are not
permanently affixed to the chassis, Any unau-
thorized modifications to the electronics or
chassis will void the warranty.
IMPORTANT
Do not attach enhancement accessories such
as rings, mats, or dampers to individual com-
pact discs. These accessories may interfere
with the compact disc transport, resulting in
erratic playback and/or poor sound.
AC POWER GUIDELINES
The KPS 28c has superb regulation and does
not require a dedicated AC circuit. Avoid connec-
tions through extension cords or multiple AC
adapters. High quality 15 amp grounded AC
strips are acceptable. High quality AC line condi-
tioners or filters can be used if they are ground-
ed and
I
meet or exceed the unit’s power supply
rating of 100 VA.
Krell Playback System 28c
3