Filter
Top Products
Operating the KPS 28c, continued
Key in the desired track sequence using the
direct track access keypad (26). The select-
ed tracks, the number of tracks selected, and
the total playing time of the programmed
track sequence appear in the compact disc
display in the order in which the tracks are
stored.
Note
Tracks consisting of two digits must be keyed
within eight seconds of each other.
3. Press the play button (12) or key (29) to begin
playback of a programmed sequence.
4. Press the stop button (11) or key (28) once
stop playback.
To Clear a Programmed Sequence:
1. Press the stop key (28) twice to clear the
entire program.
2. Press the stop key then the clr key on the
direct track access keypad (26) to remove
selected tracks from the programmed se-
quence. The track that was programmed last
is removed first.
Note
If you press the power button (4) or key (22)
and place the KPS 28c in the stand-by mode,
the programmed sequence is automatically
erased.
HOW TO CREATE AN A/B LOOP
1. Begin playing a track by pressing the play
button (12) or key (29), or select a track using
the direct track access keypad (26), the track
forward and the back keys (30) or the search
forward and back keys (31).
2. When you hear the selection that you want
as the beginning of the loop, press the A/B
key (33) to insert the start position. The
phrase REPEAT A-B flashes in the compact
disc display (7).
3. When you hear the selection you want as the
end of the loop, press the A/B key again to
insert the finish position. REPEAT A-B stops
flashing.
4. Playback of the loop begins automatically
and continues until you press the stop button
(11) or key (28).
5. Press the stop button or key again to delete
the A/B loop.
14 Krell Playback System 28c