Filter
Top Products
REMOTE CONTROL
REMOTE CONTROL OPERATION
The KPS-20 comes equipped with a universal remote control from which
basic preamp, amplifier, processor, and complete transport functions can be
controlled. A brief description of the buttons and their functions is provided. A
diagram of the remote control is provided on page 21. All KPS-20 functions can
be controlled from the front panel or the remote control. Basic preamp and
amplifier functions are listed below.
REMOTE ONLY FUNCTIONS
(AMP) POWER: Turns KRELL Audio Standard or S-Series amplifiers On or Off.
(AMP) METER: Turns KRELL S-Series amplifiers bias level meters On or Off
and cycles through KRELL Audio Standard meter functions.
There are three buttons on the face of the remote control marked PLAYER,
PREAMP, and D/A. These buttons determine which type of KRELL component
the remote control will address. When one of these function buttons is selected,
the LED directly above that button will flash. These buttons affect only the
functions beneath them.
PLAYER: When engaged, the remote control addresses a KRELL CD Player.
Control of digital input selection is available for the KPS-20i and KPS-20i/I.
Control of volume and mute are available for the KPS-20i/I.
PREAMP: When engaged, the remote control addresse~ a KRELL remote control
preamplifier. Control of Volume, Phase, Input Select, and Mute are accessible
from the remote control.
D/A: When engaged, the remote control will address future KRELL processors.
This button is not used for the KPS-20 Series.
19