Filter
Top Products
KPS-20i AND KPS-20i/1 DETAILS
DIGITAL SOURCE TO KPS-20i INTERLINK CONSIDERATIONS
Care should be taken in selecting the type of cable used to link a digital
component to the KPS-20i or KPS-20i/I. Although the KPS-20 series will accept
all industry standard formats, we suggest using the ST wide bandwidth format.
Refer to the KPS-20i Typical System Setup on page 24.
DIGITAL INPUT CONNECTIONS
The KPS-20i and KPS-20i/I come standard with most current digital input
formats: ST fiber optic, AES/EBU balanced, EIAJ fiber optic, and two SPDIF
coaxial inputs.
Connect the sources’ digital output(s) to one of the digital inputs on the
KPS-20i or KPS-20i/I. When the corresponding input of the desired digital
source (must be ON) is selected, the appropriate input indicator LED will
illuminate. The Sync LED will then illuminate, indicating the digital source and
internal processor have linked. The Processor automatically selects the correct
input frequency for the source.
DIGITAL OUTPUTS
The KPS-20i comes standard with one coaxial digital output. Signal from the
input selected on the front panel or remote is routed to this output for sending
to a digital recording device or external D/A processor.
An optional Digital Output Module is available to provide additional outputs in
ST optical and EIAJ optical formats. Also included is a second ST output that
can be internally switched between the normal digital output and Krell’s
proprietary Time Sync system. Please refer to pages 16 through 18 for more
information about the connection of digital outputs and Time Sync.
14