Krell Industries KAV-280cd CD Player User Manual


 
Placement
Before you install the KAV-280cd into your system, review the
following guidelines to choose the location for the KAV-280cd. This
will facilitate a clean, trouble-free installation. The KAV-280cd does
not require any type of special rack or cabinet for installation. For the
dimensions of the KAV-280cd, see Specifications, on the back
cover.
Place the KAV-280cd on a firm, level surface, away from excessive
heat, humidity, or moisture. The KAV-280cd requires at least two
inches (5 cm) of clearance on each side and at least two inches
(5 cm) of clearance above and below the component to provide ade-
quate ventilation. Installations inside cabinetry may need extra venti-
lation.
Do not place the KAV-280cd near hum sensitive components such
as preamplifier phono stages or turntables. Although the KAV-280cd
is well shielded, placing it near these components could create inter-
ference and cause hum.
Note The KAV-280cd incorporates an advanced suspension system and does
not require additional mass coupling or isolation. You may experiment with
feet or cones as long as they are not permanently affixed to the unit. Any
unauthorized modifications to the unit or electronics will void the warran~
IMPORTANT Do not attach enhancement accessories such as rings, mats, or
dampers to individual compact discs. These accessories may interfere
with the compact disc transport, resulting in erratic playback and~or
poor sound.
AC Power
Guidelines
The KAV-280cd has superb regulation and does not require a dedi-
cated AC circuit. Avoid connections through extension cords or multi-
ple AC adapters. High quality 15 amp grounded AC strips are accept-
able. High quality AC line conditioners or filters may be used if they
are grounded and meet or exceed the unit’s power supply rating of
100 VA.
4
KrellKAV-280cd