Filter
Top Products
Back Panel Description
See Figure 2 on page 8
DIGITAL OUTPUTS
13 Optics Digital Output
The KAV-280cd is equipped with an EIAJ fiber optic digital output
with a TosLink connector.
14 Coax(ial) Digital Output
The KAV-280cd is equipped with an S/PDIF coaxial d igital output
with an RCA connector.
ANALOG OUTPUTS
15 Left and Right Balanced Analog Outputs
The KAV-280cd is equipped with one pair of balanced analog out-
puts with XLR connectors.
16 Left and Right Single-Ended Analog Outputs
The KAV-280cd is equipped with one pair of single-ended analog
outputs with RCA connectors.
REMOTE
CONNECTIONS
17 RC-5 In
The KAV-280cd is equipped with an RC-5 input that makes custom
installation easy and secure by accepting baseband RC-5 input com-
mands from hardwired remote controllers.
18 12 MDC Out
The KAV-280cd is equipped with an output that sends 12 VDC
(12 V trigger) power on/off signals to other Krell corn ponents and
other devices that incorporate a 12 JV trigger. This allows you to tum
other components on or off, or to and from stand-by, from the
KAV-280cd. When the KAV-280cd is switched between stand-by
and the operational mode, it sends a s~gnal from the 12 VDC Out
that will switch other components, allowing whole systems or parts of
systems to be easily coordinated.
Notes When the component is in the operational mode, the 12 VDC Out provides
12 V of DC output. When the component is in the stand-by mode or off, the
DC output is 0 V.
The 12 VDC output current is limited to 30 mA.
Krell KAV-280cd 9