Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Acquiring the EDID
10
Table 5: TP Connector Pinout
36
7
812
5
4
1
4
5 7
8632
Figure 6: TP Connector
EIA /TIA 568A
EIA /TIA 568B
PIN Wire Color PIN Wire Color
1 Green/White 1 Orange/White
2 Green 2 Orange
3 Orange/White 3 Green/White
4 Blue 4 Blue
5 Blue/White 5 Blue/White
6 Orange 6 Green
7 Brown/White 7 Brown/White
8 Brown 8 Brown
Pair 1 4 and 5 Pair 1 4 and 5
Pair 2 3 and 6 Pair 2 1 and 2
Pair 3 1 and 2 Pair 3 3 and 6
Pair 4 7 and 8 Pair 4 7 and 8
6 Acquiring the EDID
The TP-145 transmitter can capture the EDID information from a display device.
To load the default EDID:
1. Plug the 12V DC power adapter into the power socket on the TP-145 and
connect the adapter to the mains electricity.
2. With no display device connected to the TP-145, press the EDID CAPTURE button.
3. The EDID STATUS LED flashes rapidly several times and the new EDID is copied.
To capture the EDID information from a display device:
1. Using a short cable
1
2. Connect power to the display and switch it on.
, connect the XGA INPUT 15-pin HD connector on the
TP-145 to the input XGA connector of the display.
3. Plug the 12V DC power adapter into the power socket on the TP-145 and to
the mains electricity.
4. Press the EDID CAPTURE button.
5. The EDID STATUS LED flashes slowly several times and the EDID is captured.
6. Disconnect the display.
1 For example, Kramer model number C-MGM/MGM-1