Kramer Electronics TP-133 Satellite Radio User Manual


 
TP-133/TP-134 - Overview 3
3
3 Overview
The TP-133 and TP-134 are a high-performance, TP (Twisted Pair) transmitter
and receiver for transmitting computer graphics video, balanced/unbalanced
stereo audio and bidirectional RS-232 data signals over extended distances using
CAT 5/6 cable. The TP-133 and TP-134 together form an extended computer
graphics/audio/data line transmission and reception system. The TP-133 converts
computer graphics video, balanced/unbalanced stereo audio and RS-232 data into
a TP signal. The TP-134 converts the TP signal back into computer graphics
video, balanced/unbalanced stereo audio and RS-232 data. More specifically, the
TP-133 and TP-134 support:
Video resolution up to WUXGA 1920 x 1200
Automatic EQ Compensation - automatically detects and compensates for
the EQ losses in the TP cable. Can also be set manually (TP-134)
Automatic Skew Correction - automatically detects and corrects the
differential delay in the R, G & B color components due to the TP cable. Can
also be set manually (TP-134)
Full duplex, bidirectional RS-232 transmission
Increased level of protection against noise, spikes and interference in
adverse environments
Transmission range of up to 200m (656ft)
Cable - for optimum range and performance, use Kramer's BC-DGKat524,
BC−DGKat623 and BC−DGKat7a23 cables. Note that the transmission range
depends on the signal resolution, graphics card and display used. The distance
using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges.
Use only shielded cable where both ends of the shield are soldered to ground
Control - Skew: auto or manual (R, G & B); equalization (peaking): auto or
manual
Built in Test Pattern Generator for manually setting R, G & B skew and
equalization
Compact MegaTOOLS™ - 2 units can be rack mounted side−by−side in a
1U rack space with the optional RK−T2B universal rack adapter