Filter
Top Products
Memory functions
Save station
The world receiver can save 400 stations in each frequency range.
To store a station, proceed as follows:
• Set the frequency range with the frequency selection switch and then
the station that you want to save.
• Press the
MEM button. The screen shows the PAGE memory page and
MEM flashes.
• Within 10 seconds press the
PAGE button (the PAGE message flashes),
and then select a memory page (from 00–39) using the
UP or DOWN
button.
• Within 10 seconds use the
M.0/5–M.4/9 buttons to select a memory
space to store the station. For example, press the
M.0/5 button once
for memory space 0 and again for memory space 5. The occupancy
is shown on the screen.
• Press
MEM again to save the station. The PAGE and MEM messages
are shown on a permanent basis.
Note:
If the world receiver is connected to the mains adapter and no
batteries have been inserted, the station memories are lost when
the adapter plug is pulled from the socket.
- 27 -
IB_KH2029_DT46054_LB6 05.01.2010 16:55 Uhr Seite 27