Filter
Top Products
• Press the UP or DOWN button to set the desired time.
5 countdown times are preset on the memory buttons and you can open
these directly using the corresponding memory button:
Button
M.0/5 10:00
Button
M.1/6 30:00
Button
M.2/7 45:00
Button
M.3/8 60:00
Button
M.4/9 90:00
• Press the
MEM button to save the set time, the memory space indicator
MEM flashes on the screen. Now use the M.0/5–M.4/9 buttons to select
a memory space; when you press the relevant memory key the time is
saved in this memory space and the time previously stored there
overwritten.
• When the
MEMORY SCAN button is pressed again you leave the
countdown mode.
Call up and activate the countdown function
• Press and hold down the MEMORY SCAN button for around 2 seconds,
the screen shows D 00. 00.
• Select the desired, saved countdown time with the aid of the
M.0/5–M.4/9
memory buttons.
• Press
SNOOZE to start the countdown. Pressing the SNOOZE button again
pauses the countdown.
When the set time has been counted down, an alarm sound plays for one
minute becoming gradually higher in tone and louder.
• Press the
MEMORY SCAN button to pause the countdown and leave
countdown mode.
- 23 -
IB_KH2029_DT46054_LB6 05.01.2010 16:55 Uhr Seite 23