Filter
Top Products
The time functions can only be set when the radio is switched off. If an RDS
signal is not received at the first switch-on, the pre-adjusted time for the
multi-band radio begins with "0:00 00".
If the device is disconnected from its power supply the settings are lost.
Time, date, time zone and world time
You can set the time, date and time zone via the MODE button. In addition,
you can check and adjust the world time, the date alarm, medium wave
reception, the alarm time interruption and the hour mode as well as switch
the automatic update on or off.
When you press the button
MODE with the radio switched off, the function to be
programmed blinks for about 15 seconds. During this time, adjust the setting
with the
UP/DOWN buttons.
• Press
MODE x 1: Setting clock time
• Press
MODE x 2: Setting the date
• Press
MODE x 3: Set time zone (“Local City”)
• Press
MODE x 4: Show world time
• Press
MODE x 5: Date alarm
• Press
MODE x 6: Set reception range for medium wave.
• Press
MODE x 7: Set alarm pause.
• Press
MODE x 8: Set 12/24 hour mode.
• Press
MODE x 9: Switch automatic update on/off
To apply a setting, just wait until the screen stops flashing (the screen reverts
to the time indication) or press
MODE to move on to the next function.
- 13 -
IB_KH2029_DT46054_LB6 05.01.2010 16:55 Uhr Seite 13