Filter
Top Products
8
CONTROL AND FEATURE DESCRIPTIONS
1: 3.5 mm AUXILIARY INPUT allows a personal music player, TV, computer or
any other device with a headphone output to be played through the KS-600.
2: PHONE output. Plug in conventional stereo headphones or ear buds here for
personal listening.
3: STANDBY/ON – basically the “power switch”. Note: this switch does not
completely power down the KS-600. If the KS-600 will not be used for a long
period of time, it should be unplugged to save energy. In standby mode, the KS-
600 consumes approximately 5-watts.
4: VOLUME. With the unit playing, these controls increase or decrease the
sound level.
5: FUNCTION – selects iPod, AUX, CD, or TUNER.
6: FM/AM selector – switches between FM and AM radio bands.
7: REMOTE SENSOR window. Point the remote control toward this window for
best remote control range.
8: MAIN DISPLAY WINDOW provides information specific to the selected
operating mode of the KS-600.
9: STOP button. Used to halt play of the CD, but not of the iPod.
10: TUNING DOWN/SKIP In TUNER mode (AM or FM) decreases the
received frequency. When an iPod or CD is present and playing, controls the
tracks, or if held down, allows searching within the current track.
11: MEMORY/TIME SET dual function button. In TUNER mode, used to store a
radio station frequency for quick access. Also used to set the built-in clock.
12: OPEN/CLOSE used to raise or lower the CD drive cover providing access to
the CD spindle.
13: TUNING UP/SKIP
In TUNER mode (AM or FM) increases the received
frequency. When an iPod or CD is present and playing, controls the tracks, or if
held down, allows searching within the current track.
14: PLAY/PAUSE
used to start and pause CD or iPod playback.
15: TIMER used to setup turn on and turn off times.