17
used with the KS-600; however, an adapter (not supplied) is required. Suitable
adapters are available at most electronic stores.
USING THE SLEEP FUNCTION:
Press the SLEEP button (16) to activate the sleep timer. This feature
automatically silences the KS-600 after a 90, 60, or 30-minute delay, allowing the
user to go to sleep to music. Pressing the sleep button a forth time during the
90, 60, 30 selection process displays 00, meaning that the sleep function is
disabled. While the sleep timer is running, you can check the remaining time by
pressing the sleep button once.
TROUBLESHOOTING:
Power button does not turn the unit on.
Is the unit plugged in?
Check the outlet to make sure it has power. Is it a switched outlet? Plug
in a light and verify that the electrical outlet is live.
No sound through speakers.
Check the connections to the speakers. Only the bare wire tips should
enter the oval shaped holes on the speaker connectors.
Confirm that the correct source is selected. Try FM or AM radio.
See if headphones are plugged into the headphone jack. Having
headphones plugged in will silence the speakers.
Is the volume turned up?
Is the sound “muted”? If so, un-mute the sound.
Remote control does not function.
Check the battery in the remote control. If you have a cell phone camera,
camcorder, web cam, or digital camera, have someone point the remote
toward the camera and start pressing buttons. If the battery is good, the
camera’s display will show the light on the end of the remote flashing.
This light is invisible to the eye, but electronic cameras can see it.