Kenwood X-SE7 Stereo System User Manual


 
R-SE7/DP-SE7/X-SE7 (En)
38
Preparation sectionBasic sectionApplication sectionKnowledge sections
Convenient CD recording
Press the O.T.E. key.
1
2
To end recording in the middle
÷ Both the cassette deck and CD player stop.
Step 2 also can be executed after the order of the
tracks has been programmed.
÷ Recording of CD starts at the same time as playback.
÷ When the tape direction is changed at the end of the
tape, no sound is recorded on the guide tape. When
interruption of a track is to be avoided, restart recording
from the very beginning of the reverse side according to
"Recording".
When the O.T.E. key is pressed while the CD
player is in the stop mode, recording of a CD can
be started at the same time as playback.
One-touch recording of an entire CD
(ONE TOUCH EDIT.....recording of all tracks)
If it is in play mode
Check that the CD player is in the stop mode.
Recording preparations are required. (Steps 1 to 4)
When the DM-SE7 (option) is connected and the
input selector is set to “MD”, the same proce-
dure can be used to make a one-touch record-
ing of the entire MD on tape.
7
O.T.E.
7
÷ When recording a CD, set the input selector to CD.