Kenwood X-SE7 Stereo System User Manual


 
R-SE7/DP-SE7/X-SE7 (En)
24
Preparation sectionBasic sectionApplication sectionKnowledge sections
Hearing sound
Basic section
DPSS
DPSS (Direct Program Search System) detects an unrecorded part of 4 seconds or more as the interval
between tracks and permits easy operation of cassette tape like a CD.
To play the next program : Press once.
To play the 4th program
after the current program : Press 4 times.
During playback of top side (while 3 is lit)
To play the next program : Press once.
To play the 4th program
after the current program : Press 4 times.
To return to the beginning
of the current program : Press once.
To play the 4th program
before the current program : Press 5 times.
During playback of reverse side (while 2 is lit)
To return to the beginning
of the current program : Press once.
To play the 4th program
before the current program : Press 5 times.
Skip search
Plays the desired music program from the beginning by skipping programs until you reach the desired
program.
Up to 16 programs can be skipped.
Listening with fast forward for unrecorded portions (dash & play)
Plays music programs repeatedly by skipping non-recorded spaces of more than 10 seconds.
÷ The operation changes in reverse mode.
1”lit.... The two tape sides are played 8
times, after which playback stops.
2Goes off.. A tape side is played 8 times, after
which playback stops.
÷ When the 7 key is pressed, playback stops and the
dash & play is canceled.
Press simultaneously.
Main unit only
1
¡
1
¡
1
¡