XD-980MD (En)
79
Preparation section Basic section Application section Knowledge sections
In case of difficulty
RemedyCauseSymptom
CD player section
÷Place the disc properly, with the label side
facing upward.
÷Place the disc properly.
÷Clean the disc referring to “Disc handling
precautions”.
÷Try another disc.
÷Refer to “Beware of condensation” and
remove the condensation by evaporation.
÷Place a disc in the CD player.
÷Press the 6 key.
÷Clean the disc referring to “Disc handling
precautions”.
÷Try another disc.
÷Clean the disc referring to “Disc handling
precautions”.
÷Try another disc.
÷Install the unit in a place not subject to
vibrations.
A CD is placed in the player but it cannot
be played.
Sound is not produced.
Sound skips.
÷The disc is placed upside down.
÷The disc position is displaced.
÷The disc is extremely dirty.
÷The disc is scratched.
÷Dew is condensed on the optics lens.
÷The disc has not been placed.
÷The player is not put to the play mode.
÷The disc is extremely dirty.
÷The disc is scratched.
÷The disc is dirty.
÷The disc is scratched.
÷The player is subject to vibration.
5
d
5
5
5
CD player section (in regard to message display)
Displayed Message Meaning Action
Err** (** indicates a number) ÷This indicates some trouble. The number
differs according to the trouble contents.
÷Return to normal condition is made by
switching the unit off and then on again.
Remote control unit
Symptom Cause Remedy
Remote control operation is not possible. ÷Batteries are exhausted.
÷The remote control is too far away from the
system, the controlling angle is deviated or
there is an obstacle in between.
÷There is no CD or MD set in the component
to be played.
÷Replace with new batteries.
÷Operate the unit inside the remote control-
lable range.
÷Set a CD or MD in the component to be
played.
%
%