Filter
Top Products
22
EN
Normal playback
Listening to a source component
1
Press the INPUT SELECTOR key (or the Input selector
keys/ DVD, VIDEO, AUX, F.AUX, TUNER) to select the source
you want to listen to.
1 Tuner (FM/AM broadcast reception)
2 "VIDEO"
3 "DVD"
4 "AUX"
5 "FRONT AUX"
2
Start playback from the selected source.
3
Use the VOLUME CONTROL knob (or the VOLUME +/- keys) to
adjust the volume.
Some preparatory steps are needed before starting playback.
Turning on the receiver
1 Turn on the power to the related components.
2 Turn on the power to this receiver by pressing the
POWER ON/STANDBY
(or the POWER ).
Selecting the input mode
If you have selected a component connected to the COAXIAL DVD,
OPT. VIDEO or DIGITAL IN (OPTICAL) jacks, make sure that the input
mode setting is correct for the type of audio signal to be used. 8
POWER ON/STANDBY
INPUT SELECTOR
INPUT MODE
INPUT
MODE
POWER
VOLUME CONTROL
INPUT SELECTOR
VOLUME
Input selector keys
Input selector keys
*5484/16-27/EN 04.5.17, 8:34 AM22