Filter
Top Products
20
EN
5
Adjust the speaker volume level.
From your usual listening position, adjust the volume levels. The volume
levels from each speaker should be the same.
÷ In steps 5, indications appear only for the selected channels of the
speakers that require adjusting.
1 Press the SETUP to begin TEST TONE.
2 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select "AUTO" or "MANUAL".
1 "AUTO": Select this setting to adjust the speaker volume
levels using the test tone. The test tone will be output from
every speaker channel in automatic sequence.
2 "MANUAL": Select to select the speaker channel to
output the test tone using SETUP key.
Press the SETUP key again select either "AUTO" or
"MANUAL".
Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to adjust the volume level of
the test tone output from the speaker channel to
be adjusted.
For "AUTO" selection, the first test tone is heard from
the front left speaker for 2 seconds. The next test tone
is heard from the speakers in the following sequence
for 2 seconds each.
The channel indication blinks while the test tone is being output.
L ) d B
÷ If you change the volume level settings for the speakers
while listening to music, the settings referred to on this
page are also changed. ¤
÷ The speaker setting values will return to the default
values when the speaker setting is set to OFF.
For "MANUAL" selection, press the SETUP key each
time to select the speaker channel, and use the MULTI
CONTROL button (or the MULTI CONTROL %/fi keys)
to adjust the volume level.
3 Press the SETUP key to accept the setting.
÷ The test tone is turned off. This model enters the mode
for inputting the distance to the speakers.
6
Input the distance to the speakers.
This setting allows the signals output from different speakers to reach
the listening position simultaneously.
÷ In steps 6, indications appear only for the selected channels of the
speakers that require adjusting.
Measure the distance from the listening position to each
of the speakers.
Jot down the distance to each of the speakers.
Distance to Front speaker (L) : ____ feet (meters)
Distance to Center speaker (C) : ____ feet (meters)
Distance to Front speaker (R) : ____ feet (meters)
Distance to Surround speaker (RS) : ____ feet (meters)
Distance to Surround back speaker (RB) : ____ feet (meters)
Distance to Surround back speaker (LB) : ____ feet (meters)
Distance to Surround speaker (LS) : ____ feet (meters)
1 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select "DISTANCE" on
setup displays, and press the SETUP key.
2 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to adjust the distance to the
front speakers.
The speaker indicator to be adjusted blinks.
÷ The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
1) 3 )FT M
3 Press the SETUP key to accept the setting.
4 Repeat steps 2 and 3 to input the distance for each of
the speakers.
Preparing for playback
Indication in feet Indication in meters
*5484/16-27/EN 04.5.17, 8:34 AM20