Filter
Top Products
33
3 Press the MENU key then press or to select
“
” (0 ms), “ ” (500 ms), “ ” (1000 ms),
“
” (1500 ms), or “ ” (2000 ms).
4 Press the MENU key to exit the selection.
5 Press the PTT, MON, or CAL key to exit Setting Mode.
■ ptt id
The transceiver can send a PTT ID signal when pressing
the PTT switch (beginning of transmission) or when
pressing and releasing (beginning of transmission and end
of transmission) the PTT switch.
1 With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
2 Press the or key to select “ ”.
3 Press the MENU key then press or to select
“
” (PTT ID is off), “ ” (send your own PTT ID
at the beginning of transmission), or “
” to “ ”
(send selected list ID number PTT ID at the beginning
and end of transmission).