Filter
Top Products
29
3 Press the MENU key then press or to select “ ”
(selcall).
4 Press the MENU key to confirm the selection.
5 Press the PTT, MON, or CAL key to exit Setting Mode.
Step 3:
Set up your own ID (ID List setting mode for Selcall)
1 With the transceiver power OFF, press and hold the CAL
key while turning the transceiver power ON (for 1 second).
• A beep will sound and the transceiver will enter ID List Setting
mode.
2 Press the or key to select a list ID number.
3 Press the MENU key then press or to select “ ”
(own ID).
• The default own ID setting is 01.
• When setting up your own ID, make sure that each member
within your group sets up a unique ID number for their own
ID. If an own ID number is duplicated, that transceiver cannot
perform selcalls.
• “
” represents an Individual Call ID.
“
” represents a Group Call ID.
“
” represents a Broadcast Call ID.
“
” represents your own ID number.
“
” clears the selected ID data.
4 Press the MENU key to confirm the selection.