Filter
Top Products
Basic
section
17
EN
4
Press the MD O.T.E. key on the remote.
If you are operating the main unit :
(1)Press the MENU key.
(2)Press the VOLUME/MULTI CONTROL keys
to select “MD O.T.E. ?”, then press the
SET/TUNING MODE key.
(3)Pressing the DISPLAY/CHARAC. key on the
remote will switch the displayed information.
Recording the CD track being played (Single-track recording)
(1) Play the CD track to be recorded.
(2) Press the MD O.T.E. key on the remote.
When you are operating the main unit, see step 4.
Recording starts after returning to the beginning of the current track.
To stop recording in the middle :
Press the 7STOP key.
÷ Be careful not to switch the power off or apply shock or vibrations to the system while “MD
WRITING” is displayed.
÷ For the types of MDs that can be recorded on this unit, see “Handling of MD”. (page 54)
÷ It is also possible to record a CD onto an MD at double speed. (page 29 to 30)
÷ The CD audio is recorded following the settings made with MD REC MODE. (page 28)
÷ The MD O.T.E. recording is not available if the CD is played in the random mode. Cancel the
random mode before proceed to recording. (page 26)
÷ When recording with high volume, sound skip may occur during MD playback. To avoid this prob-
lem, reduce the volume during recording.
“O.T.E.” blinks
MD recording
indicator
MD track number Remaining recording
time of MD
CD track number
MD recording
indicator
Elapsed time of CD
track being played
TUNEDAUTO
TRACK NO.
O.T.E.
SP
REC
EX. BASS
MHz
MD
CD
TUNEDAUTO
TRACK NO.
O.T.E.
SP
REC
EX. BASS
MHz
MD
CD
TUNEDAUTO
TRACK NO.
O.T.E.
SP
REC
EX. BASS
MHz
MD
CD
*5053/10-19/EN 5/29/01, 10:57 AM17