Kenwood M-303USB Stereo System User Manual


 
20
EN
10 Press TIMER SET (timer set) button.
The icon “TIMER”  ashes and the volume display
appears.
11 Press P.MODE (p.mode) button.
12 Press
SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–
) button
to set volume level and press
P.MODE (p.mode) button to store the setting.
13 Press TIMER SET (timer set) button.
14 Press TIMER ON/OFF (timer on/o ) button to
activate timer mode.
The icon “TIMER” changes from  ashing to steadily
lit.
The timer is now set.
15 Switch the system to standby mode.
• When reached the preset timer, the selected source will play
or switch to standby mode after the timer has been activated.
Clock/timer operation
To activate/deactivate the timer
Press TIMER ON/OFF (timer on/o ) button.
If activated, the icon “TIMER” appears on the display.
• The timer o will not be activated if the starting and stopping
time are the same.
• If the selected source (“CD”, “USB”, “TAPE” or “REC TU”) is not
available when preset timer is reached, TUNER will be selected
automatically.
• During timer setting, if no button is pressed within 7 seconds,
the system will exit timer setting mode automatically.
Sleep timer setting
If the sleep timer is activated, the system will switch
to standby mode after the selected time has expired.
Each press of the SLEEP button decreases the timer
period by 10 minutes. The sleep timer can be set up
to 90 minutes.
The icon “SLEEP” appears on the display.
The display will change to sleep time display and
change as follows:
90 min - 80 min -70 min - 60 min - 50 min - 40 min
- 30 min - 20 min - 10 min - OFF - 90 min - 80 min...
While sleep mode is in active:
To deactivate the sleep timer
Press SLEEP button or press button to turn the
power o .
• If timer o and the sleep o are all activated, the system will
switch to standby mode by the earlier timer set.