Filter
Top Products
18
EN
Program recording from a CD/MP3-CD/
WMA-CD/USB device
Desired CD tracks/MP3 les/WMA les can be
programmed in the desired sequence and recorded
onto a tape.
1 Insert a blank cassette tape into the tape deck.
2 Press the desired source button to select the
source you wish to record from.
For CD/MP3-CD/WMA-CD : Press CD/USB (CD/
USB) button to select CD input.
For USB device : Press CD/USB (CD/USB) button to
select USB input.
3 Insert a disc or a USB device and make sure that
the unit is in stop mode.
4 Program the desired sequence of CD tracks/
MP3 les/WMA les.
See page 12 and 13 for programming procedure.
5 Press TAPE REC (rec) button to set the unit into
recording standby mode.
The icon “REC.” appears on the display.
6 Press PLAY/PAUSE 6 (6) button to begin
recording.
The icon “SYNC” appears on the display.
⁄
• To end recording, press STOP 7 (7) button.
Using the cassette