Kenwood M-303USB Stereo System User Manual


 
EN
13
Programming  les (For audio  le only)
Programming  les of an MP3-CD/WMA-CD/USB
device is possible when playback is stopped. Up to 60
 les can be stored in the memory in any order.
1 In stop mode, press P.MODE (p.mode) button to
enter program setting.
The icon “PROGRAM” and “– – – P–01” appear on
the display. “– – –” indicates  le number of the disc/
USB device and “P–01” indicates program number.
The icon “PROGRAM” starts  ashing.
2 Press P.CALL/ALBUM 5 or (p.call/album +
or –) to select the desired album and press
SEARCH/TUNING 4 or ¢ (4 or ¢
search
+/–
) button
to select the desired  le.
The program number starts  ashing.
3 Press P.MODE (p.mode) button to store the
selected  le.
The  le number returns to “– – –” and the next
program number appear on the display.
4 Repeat steps 2 to 3 to select and store other
desired  les in this way.
The icon “PROGRAM” appears on the display.
5 Press PLAY/PAUSE 6 (6) button to play the
programmed  les.
• The digit buttons, 0–9 on the remote control unit can also be
used to select  les.
• “FULL” starts  ashing if you attempt to program more than 60
 les.
• Audio  les can only be programmed within the same source.
• To review the program sequence, press P.MODE (p.mode)
button in stop mode.
• If you press REPEAT (repeat) button during programmed
playback, the current  le or all programmed  les is/are played
repeatedly.
The icon “REPEAT” or “REPEAT ALL” and the icon “PROGRAM”
appear on the display.
To clear the program
Press STOP 7 (7) button once in stop mode, and
twice during program playback.
The icon “PROGRAM” disappears from the display.
• “P” represents PROGRAM.
• The program is automatically cleared as soon as the CD door
is opened.
• The function of program setting cannot be used in PLAY/
PAUSE mode.
Random play
You can play all the tracks/ les in random order.
1 During playing, pause or stop mode, press
RANDOM button to enable random play mode.
The icon “RANDOM” appears on the display.
2 To exit random mode, press RANDOM button
again.
The icon “RANDOM” disappears from the display.
• If the program function or the repeat function is on, random
play cannot be used.
Repeat play
You can play the current track/ le/album or the
whole disc/USB device repeatedly.
To repeat all the tracks/ les
Press REPEAT (repeat) button once in play or pause
mode.
The icon “REPEAT ALL” appears on the display.
• All tracks/ les are repeated continuously.
• To cancel repeat play, press REPEAT (repeat) button twice for
a normal CD and 3 times for audio  les.
To repeat a single track/ le
Press REPEAT (repeat) button twice for a normal CD
and 3 times for audio  les in play or pause mode.
The icon “REPEAT” appears on the display.
• To cancel repeat play, press REPEAT (repeat) button once.
To repeat one album (For audio  le only)
Press REPEAT (repeat) button twice in play or pause
mode.
The icon “REPEAT ALB.” appears on the display.
• To cancel repeat play, press REPEAT (repeat) button twice.
• This function cannot be used in program mode.