Kenwood LSF-1010 Speaker User Manual


 
15
LSF-1010 (EN)
DEUTSCH
FRANÇAIS
ESPAÑOL
NEDERLANDS
ITALIANO
Important Operating Notes
Satellite Speakers
1. The satellite speakers have a nominal impedance of 6 ohms. To ensure safe
and efficient speaker operation, be sure that your amplifier or receiver is able
to work with 6-ohm speakers.
2. The speaker system’s power capacity is indicated in the specifications. Do not
operate speakers at power levels above this limit. Doing so may result in dam-
age to the speakers.
1. If supplying a high-level signal, do not over-boost the bass at the amplifier or
receiver side. (Avoid excessive use of the amp’s bass control and other loud-
ness adjusters.)
2. Turn the subwoofer volume to its minimum level when making major changes
to the sound input (for example, when first switching on the amplifier or when
first dropping the needle onto a record).
Subwoofer