Filter
Top Products
13
LSF-1010 (EN)
DEUTSCH
FRANÇAIS
ESPAÑOL
NEDERLANDS
ITALIANO
Connecting to Amp's Standard PRE-OUT Jacks
Connect the PRE-OUT jacks on the amp or receiver to the LINE IN jacks
on the subwoofer. Make the connection using pin-plug audio cable.
(The cable is not included with the subwoofer.)
CAUTION
Do not plug in the power cord until you have finished mak-
ing all connections.
NotesNotes
Notes
• It is also possible to connect the subwoofer's LINE IN jacks to the REC OUT
or LINE OUT jacks on the amp or receiver (using the same cable as described
here). If you make this type of connection, however, volume adjustments at
the amp side will not affect the volume from the subwoofer. This means that
you will need to manually adjust the subwoofer volume each time you adjust
the volume at the amp side.
• If you wish to connect the subwoofer to the PRE-OUT jacks on a standalone
preamplifier, the preamp unit must include a second set of terminals for
connection to speaker amps, and must be capable of simultaneous output to
both the PRE-OUT jacks and the speaker-amp jacks.
· ª· ª
SPEAKERS
L
R
LR
PRE OUT
· ª· ª
Pin-plug audio cable (purchased separately)
PRE-OUT jacks (on amp or receiver)
Subwoofer
Making Connections
Satellite speakers
(right) (left)
Included speaker cord
White stripe
Note About Pin-Plug Cables
Some commercially available pin-plug cables have relatively plug ends that
may become bent if the subwoofer is installed vertically. Bending of plugs
may cause internal wires to break, resulting in loss of sound. If installing the
subwoofer vertically, be sure to use pin-plug cables with short plugs.
Speaker cords (included)