Filter
Top Products
25
Operations
Presetting radio stations manually
• Repeat steps 1, 2, 3, and 4 to store as many stations as necessary.
•If you store a station at a previously used preset, the old station will
be replaced by the new one.
Press the MEMORY key while receiving the station.
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again.)
Blinks for 5 seconds
Lights for 5 seconds
1
2
Tune to the station you want to store.
3
4
Receiving preset stations
Enter the number of the preset you want to receive
(up to “40”.)
1
2
Press the numeric keys in the following order:
For “15”, press.......... 0,5
For “20”, press.......... 0,0,)
• If you make a mistake entering a two digit number, press the +10 key
several times to return to the original display and start again.
Use the MULTI CONTROL keys to select one of the station
presets (1 – 40).
Press the MEMORY key to accept the setting.
Press TUNER key to select the tuner as the source.
AM
kHz
PRO LOGIC
3
DOWN MIX
DIGITAL
S.DIRECT
MONITOR
DSP
AUTO SOUND
LFE
C
SRSLS
TI.VOLB
CLIP MUTE
RDS EON PTY
TP TA NEWS
FM
MHz STEREO
AUTO
TUNED
ST.
MEMO
SW
RL
SP A
AM
kHz
PRO LOGIC
3
DOWN MIX
DIGITAL
S.DIRECT
MONITOR
DSP
AUTO SOUND
LFE
C
SRSLS
TI.VOLB
CLIP MUTE
RDS EON PTY
TP TA NEWS
FM
MHz STEREO
AUTO
TUNED
ST.
SW
RL
SP A
Listening to radio broadcasts
The RDS auto memory function assigns preset numbers to RDS stations
starting from preset number "1". Therefore, be sure to execute the RDS
auto memory function before using the following operations to manually
store AM stations and other FM stations, and RDS stations.
“Presetting RDS stations (RDS AUTO MEMORY)”. ¢
Receiving preset stations in order
(P.CALL)
•Each time you press the key, another preset station is received in
order.
Pressing the P.CALL ¢ key does the following:
=01=02=03= ... = ... 38=39=40
Pressing the P.CALL 4 key does the following:
01+02+03+ ... + ... 38+39+40+
Holding down the ¢ or 4 keys, lets you skip through the
presets, receiving each at preset station 0.5 second intervals.
1
2
Press TUNER key to select the tuner as the source.
Use the P.CALL
4
/
¢
keys to select the desired
station.
TUNER
Numeric keys
RC-R0616
RC-R0512
RC-R0512RC-R0616
TUNER
P.CALL
4
/
¢
MULTI CONTROL
MEMORY