Kenwood KRF-V6050D Home Theater System User Manual


 
30
Operations
Ambience effects
Convenient functions
Adjusting the sound
You can make further adjustments to the sound while listening to playback
in the surround mode.
1 Press the SOUND key repeatedly until the desired item appears
in the display.
Each time you press the button, the menu changes as follows:
Note that some items are not displayed in certain modes.
1 BASS (low frequency range sound quality adjustment) )
2 TREB (high frequency range sound quality adjustment) )
3 C (center speaker level adjustment)
4 SR (right surround speaker level adjustment)
5 SL (left surround speaker level adjustment)
6 SW (subwoofer level adjustment)
7 INPUT (input level adjustment) (
8 NIGHT (midnight mode on/off-Dolby Digital mode only)
2 Use the MULTI CONTROL keys to adjust the setting as desired.
• The adjustment item is displayed for approximately 8 seconds.
Midnight mode (Dolby Digital mode only)
When watching movies at night , you might not be able to raise the volume
as loud as normal. Midnight mode compresses the dynamic range of
previously specified parts of the Dolby Digital sound track (like scenes
with sudden increases in volume) to minimize the difference in volume
between the specified and non-specified parts. This makes it easy to hear
all of the sound track, even when listening at low volumes.
1 Press the SOUND key repeatedly until “NIGHT” appears on the
display.
• This can be selected only if DVD or VIDEO2 is selected as the source
and the listen mode is set to “DOLBY DIGITAL.”
1
DVD 6-channel playback
Using a DVD player or the like equipped with six (5.1) output channels and
the receiver, you can enjoy surround sound playback.
When you try to play a disc other than Dolby Digital such as DTS CD, no
sound is produced or, noise may be heard. To avoid this situation, make
sure that you connect the component to the receiver’s DVD/6ch. INPUT
jacks through a surround processor which can decode the surround
signal you wont to listen to.
Connecting a DVD player which can decode the surround signal itself is
also acceptable.
Preparations
Select “DVD/6ch” as the input source.
•If speaker system B is on when “DVD/6ch” is selected as the input
source, it switches off and speaker system A turns on automatically.
Start playback of the DVD software.
Adjust the volume.
• It is not possible to adjust the volume level or sound quality (SET UP,
SOUND) of the channels separatedly when the receiver is in the DVD/
6ch mode. Adjust the volume with the controls of the DVD player.
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer’s own volume control.
•Connect your DVD player to the DVD/6ch jacks of the receiver.
•Turn on all other components that will be used.
•Complete “Preparing for surround sound”. *
3
4
Select "6ch INPT" by pressing the INPUT MODE key.
2
RC-R0512
RC-R0616
MULTI CONTROL
DIMMER
SOUND
SOUND
MULTI
CONTROL
RC-R0512
INPUT SELECTOR
DVD
INPUT MODE
RC-R0616