Kenwood KRF-V6050D Home Theater System User Manual


 
12
Preparations
L
VIDEO 1
S VIDEO
R
A
LC
LR
LR
B
PLAY INREC OUTPLAY IN
MONITOR
OUT
DVD
R
OPTICAL
DVD
CD/DVD
VIDEO 2/MONITOR
COAXIAL
DIGITAL IN
Digital connections
COAXIAL DIGITAL OUT (AUDIO)
Optical fiber
cable
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See “Connecting video components”.)
0
DOLBY DIGITAL
RF OUT (AUDIO)
LD player
RF digital
demodulator
(DEM-9991D)
(sold separately)
PCM OUT
CD player
Component with a DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
OPTICAL DIGITAL OUT (AUDIO)
Setting up the system
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS,
Dolby Digital, or standard PCM (CD) format digital signals.
If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section
carefully. 8
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO2/MONITOR jacks. (See “Connecting video components”.)
COAXIAL DIGITAL OUT (AUDIO)