Filter
Top Products
22
Operations
Each press switches the display mode as follows:
1 PS (Program Service name) display
2 RT (Radio Text) display
3 Frequency display
Using the RDS DISP. (Display) key
1 PS (Program Service name) display:
The station name is displayed automatically when an RDS broadcast
is received,
If no PS data was sent, "NO PS" is displayed.
Pressing the RDS DISP. key changes the contents of the
display.
2 RT (Radio Text) display:
Text data accompanying the RDS broadcast scrolls across the
display. "NO RT" or "RT----" is displayed if the current RDS station
does not provide RT data.
1
2
3
This function automatically stores up to 40 RDS stations in the preset
memory. In order to use the PTY function, the RDS stations must be
stored in the preset memory using the RDS AUTO MEMORY function.
Use the INPUT SELECTOR knob to select the tuner.
Use the BAND key to set the broadcast band to "FM".
Press and hold the MEMORY key for more than 2 seconds.
Presetting RDS stations
(RDS AUTO MEMORY)
• After a few minutes, up to 40 RDS stations are preset in order from
channel "01".
•Stations already stored in the preset memory may be replaced by
RDS stations. (i.e., If the RDS AUTO MEMORY function finds 15
RDS stations, the stations currently preset at numbers 01~15 are
replaced by the RDS stations.)
3 Frequency display:
Displays the frequency of the current station.
Listening to radio broadcasts
RDS DISP.
FM
STEREO
AUTO
TUNED
ST.
SW
RL
SP
RDS
FM
STEREO
AUTO
TUNED
ST.
SW
RL
SP
RDS
INPUT SELECTOR
MEMORYAUTO
BAND
STEREO
SW
RL
SP
STEREO
SW
RL
SP
*4967/01-/EN 3/19/01, 6:34 PM22