Filter
Top Products
Press the ¢ button to search through the functions until you
see the one you want to adjust in the display.
Press the 4 button to search through the functions
backward.
Example: If you want to switch the tuning mode from manual
to automatic, first search through the functions until
you see "MANUAL" in the display.
Changing setting for currently displayed function
Press either the AM or FM button.
The setting will change for each function.
Example: The tuning mode will switch from manual to
automatic, and "AUTO" is displayed.
Ending the menu mode
Press the MENU button.
The selection includes:
Touch Sensor Tone (BEEP ON / OFF) ↔ Time Adjustment*
1
<Manual> (CLK ADJ*
2
) ↔ Automatic Time Adjustment (SYNC
ON / OFF) ↔ Disabled System Indicator (DSI ON / OFF) ↔
Selectable Illumination (COL GRN / AMB) ↔ News Bulletin
Function (NEWS OFF / ##M) ↔ Local seek*
3
(LO.S OFF / ON)
↔ Selecting Tuning Mode*
3
(AUTO / MANUAL) ↔ Auto
Memory Entry*
3
(A-MEMORY (start)) ↔ AF Function*
4
(AF ON /
OFF) ↔ Region Restrict Function*
4
(REG ON / OFF) ↔ Auto TP
Seek*
4
(ATPS ON / OFF) ↔ Monaural Reception*
5
(MONO OFF
/ ON) ↔ Text Scroll*
6
(SCL MANU / AUTO) ↔ Touch Sensor
Tone
*
1
When Automatic Time Adjustment is off
*
2
Time adjustment mode entered
*
3
In Tuner mode
*
4
Except in AM band
*
5
In FM reception of Tuner mode
*
6
In External disc control mode
• Make sure to end the menu mode when finished.
NOTE
4
3
To accommodate a greater number of functions, a menu
system has been employed for making settings. Press the
MENU button to enter the menu mode and then display the
function to make the setting. Details on each setting are
explained separately in the corresponding function page.
Hold down the MENU button for one second or more.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
Selecting function to set
2
1
Menu System
This function amplifies low and high tones when the volume is
turned down.
The LOUD indicator lights up, when the loudness function is
on.
Turning Loudness On/Off:
Hold down the LOUD button for one second or more to switch
the loudness on and off.
Loudness
This function allows you to turn down the volume quickly.
Turning Attenuator On/Off:
Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.
Turning down the volume all the way turns off the attenuator
function.
NOTE
Attenuator
Basic operations
— 6 —
English