Kenwood KR-797 Stereo Receiver User Manual


 
KR-897/KR-797 (En)
8
L
R
REC OUT
PLAY IN
VIDEO 1
/TAPE 1
PLAY IN
TAPE 2
MONITOR
VIDEO 2
SUBWOOFER
PRE OUT
PLAY
IN
+
FRONT SPEAKERS
( 816Ω)
SWITCHED
FM
75Ω
GND
AM
CD
PHONO
L
R
R
L
R
L
AUDIO
FM
300Ω
REC OUT
SYSTEM
CONTROL
ANTENNA
SURROUND
SPEAKERS
( 48Ω)
CENTER
SPEAKER
( 816Ω)
+
R
L C
ADAPTOR
L
R
OUT IN
( )
ƒ
Connection of speakers (KR-797)
Speaker system
(8Ω ~ 16Ω)
R
L
Center speaker
(8Ω ~ 16Ω)
Powerd
sub-woofer
·ª ª ·
ª·
ª
Surround speakers
(4Ω ~ 8Ω)
RL
÷Never short-circuit the + and - speaker cords. For the symptom and remedy when a speaker cord is shorted:
÷If the left and right speakers are connected inversely or if the speaker cords are connected with reversed polarity, the sound becomes unnatural with
ambiguous acoustic image positioning. Be sure to connect the speakers and speaker cords correctly.
÷Connect a sub woofer if you want to enhance the bass sound. The connected sub-woofer should be a power sub-woofer with a built-in amp.
·
·
ª
2 Insert cord.
1 Push lever.
3 Return lever.
ADAPTOR jacks (KR-797)
When an adaptor-type component such as a graphic equalizer is
connected, unplug the shorting pins from the ADAPTOR jacks and
connect the component to these jacks.
÷When the ADAPTOR jacks are not used, be sure to plug the shorting
pins into jacks. Otherwise, the sound will not be produced.
÷When the ADAPTOR jacks are used, retain the shorting pins and be
careful not to lose them.
÷Never plug a shorting pin into other jacks than ADAPTOR jacks.
Otherwise, the unit may be damaged.
Shorting pins
L
R
ADAPTOR
L
R
OUT IN
shorting pins
07.6.11, 5:06 PM8