Filter
Top Products
KR-897/KR-797 (En)
15
Sound adjustment functions
: Keys or controls to be used in this operation
÷If the SURROUND, 3STEREO or S.DIRECT indicators are lit, press the
STEREO key to turn them OFF.
The displayed value changes.Display when “BASS” is selected.
3 Adjust the balance.
4 Press the SETUP key to return to the
previous input selector display.
1 Ensure that the SRS 3D and S.DIRECT
indicators are not lit.
SOUND
LEVEL
CONTROL
2 Select the tone mode to be adjusted (from
BASS, MIDDLE and TREBLE).
3 Adjust the tone
To increase
level
To decrease
level
1 Ensure that the SURROUND, 3 STEREO
and S.DIRECT indicators are off.
LEVEL
CONTROL
To decrease
the right
channel sound
SETUP
Adjusting the left/right sound balance
Adjusting the tone
2 Press the SETUP key.
To decrease
the left
channel sound
POWER
PHONES
UP
DOWN
1234567890
AUTODIRECT
MEMORY
PRO LOGIC
STEREO SRS 3D
N.B.
SOURCE
DIRECT
P.CALL
3 STEREO
TUNING
TAPE2
MONITOR
POWER
12
3
45
6
78
9
DISK SKIP
0
+10
SOUND
CENTER
MODE
A/B +100
TUNER
CD PHONO
VIDEO2
MUTE
1
¡
7
6
AV AUX
REMOTE CONTROL UNIT
RC-R0505
4 ¢
2
AUTO
BAND
P.CALL
VOLUME
CONTROL
STANDBY
SPEAKERS
SRS
3D
SPEAKERS
INPUT SELECTOR VOLUME CONTROL
+10
AUDIO-VIDEO SURROUND RECEIVER KR-897
BAND DIMMER
VIDEO1
TAPE1
SETUP
TAPE2
MONITOR
LEVEL
CONTROL
LISTEN
MODE
BASS 2
BASS -2
SURROUND
3 STEREO
S.DIRECT
÷Adjustment of SRS (Sound Retrieval System) 3D Stereo. ¶
The level can be adjusted between -8 and
+8 with an increment or decrement of 2
per press.
1 BASS : Mode for adjusting the low frequencies.
2 MIDDLE : Mode for adjusting the middle frequencies.
3 TREBLE : Mode for adjusting the high frequencies.
4 End of setting
Each press of the key switches the modes as follows:
(When the SRS 3D Stereo is OFF)
÷If the S.DIRECT indicator is lit, press the S.DIRECT key to turn it off.
If the SRS 3D indicator is lit, press the SRS 3D key to turn it off.
S.DIRECT
SRS
3D
Make sure that the
light is out.
---yt- -
Position of the right speaker
Indicates the centerPosition of the left speaker
Indicates the balance setting
Make sure that the light is out.
07.6.11, 5:06 PM15