Kenwood KR-797 Stereo Receiver User Manual


 
KR-897/KR-797 (En)
23
Presence play
The surround modes allow you to enjoy the feeling of presence in music. Select the mode according to the source or components
played. For the connections of the surround and/or center speakers, refer to “Connection of speakers”. 78
In case center speaker is not used
TV
TV
Front speaker
Center speaker
Surround speaker Surround speaker
Front speaker
TV
Center speaker
Front speaker
DOLBY PRO LOGIC surround mode
Video, DVD and LD software programs car-
rying the
mark contain re-
cording of the same Dolby Surround data as
those used in movie theaters.
The DOLBY PRO LOGIC surround mode uses
the Dolby Surround data and brings into
home a similar sound field with full of pres-
ence to movie theatres.
To use this mode, connect the surround
(and center) speakers.
DOLBY 3 STEREO mode
If the left and right speakers are installed apart from each other,
the center acoustic image (words, etc.) may vary depending on
the listener’s position. The DOLBY 3 STEREO mode provides an
improved positioning of the center acoustic image regardless of
the listening position.
Use this mode when playing videotape, DVD or LD software
carrying the mark.
To use this mode, connect the center speaker.
Recommended speaker installation
It is recommended that the surround speakers are installed straight to the left and right of the listening position or slightly behind,
at a height of about 1 meter higher than the listener’s ears. Each surround speaker should be installed so that the longer sides are
horizontal.
07.6.11, 5:06 PM23