Filter
Top Products
5
ENGLISH |
GETTING STARTED
Default:
XX
PRESET TYPE NORM: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;
MIX: Memorizes one station for each preset button regardless of the selected band.
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
PANDORA SRC
KMM-100U
:
ON: Enables PANDORA in source selection. ; OFF: Disables. (
➜
9)
BUILTIN AUX
ON: Enables AUX in source selection. ; OFF: Disables. (
➜
10)
SWITCH PRE REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out
terminals on the rear (through an external amplifier).
SP SELECT
OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches, 6×9 inches
or 6 inches) or OEM speakers for optimum performance.
F/W UPDATE
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
RADIO
Search for a station
1 Press L SRC to select TUNER.
2 Press repeatedly (or press
*
AM– / #FM+ on RC-406) to select FM1/ FM2/ FM3/ AM.
3 Press 4 / ¢ (or press 4 / ¢ (+) on RC-406) to search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or press one of the
number buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406)
1 Press
*
AM– / #FM+ to select a band.
2 Press DIRECT to enter Direct Access Tuning.
“– – – • –” (for FM) or “– – – –” (for AM) appears on the display.
3 Press the number buttons to enter a frequency.
4 Press ENT 38 to search for a frequency.
• To cancel, press .
• If no operation is done for 10 seconds after step 3, Direct Access Tuning is automatically canceled.
EN_KMM-100[KN]3.indd 5EN_KMM-100[KN]3.indd 5 11/21/12 8:50:29 AM11/21/12 8:50:29 AM