Kenwood VR-6070 Stereo System User Manual


 
27
EN
Normal playback
Adjusting the sound
LOUDNESS
TONE
BASS BOOST
TONE
VOLUME
CONTROL
MUTE
A SPEAKERS B
SPEAKER EQ ACTIVE EQ
PHONES
MULTI
CONTROL
VOLUME /
POWER
SPEAKER EQ
ACTIVE EQ
MUTE
Joystick
(MULTI CONTROL5/,
DOWN2 /UP3)
Adjusting the TONE
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo mode and when THX OFF.
1 Press the TONE key to select the TONE mode.
2 Use the MULTI CONTROL knob or Joystick (5/) to select TONE
ON/OFF.
L
SL S SB SR
C R
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
SW
LFE
3 When in TONE ON selection, press the TONE key for the following
displays.
BASS : Select this to adjust the low frequency range.
TREBLE: Select this to adjust the high frequency range.
4 Use the MULTI CONTROL knob or Joystick (5/) to adjust the
sound quality.
L
SL S SB SR
C R
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
AB CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
SW
LFE
The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.
The adjustment item is displayed for approximately 8 seconds.
Once-touch low frequency emphasis (BASS BOOST)
(remote control only)
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo modes and when THX OFF.
Press the BASS BOOST key.
Press the key once to select the maximum (+10) low frequency
emphasis setting.
This key does not function when the receiver is in the sound quality
or ambience effects adjustment mode.
Switching back to the previous setting
Press the BASS BOOST key again.
Adjusting the LOUDNESS mode (remote control only)
You can adjust the Loudness function which controls the low volume
settings to maintain the music's richness. The adjustment can be made
when the receiver is in the PCM stereo and analog stereo mode and
when THX OFF.
Press the LOUDNESS key to turn the LOUDNESS setting ON.
To cancel
Press the LOUDNESS key again so that the LOUDNESS
indicator goes off.
Muting the sound
The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.
L
SL S SB SR
C R
MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE D
B CLIP
AUTO DETECT
SW
LFE
SP
A
Blinks
To cancel
Press the MUTE key again so that the MUTE indicator goes off.
MUTE ON can also be deactivated by turning the VOLUME
CONTROL knob or pressing VOLUME +/ keys.
VR6070/23-32/EN 3/26/02, 2:33 PM27