Filter
Top Products
38
Remote Control
• The display for selecting disc appears.
Press the [Text] key.
>051.
>050.D.Title
Home Sel
4
Press the
5
/
∞
keys to select the desired disc, then press
the [Sel] key.
5
>02.T.Title
>01.T.Title
Back Sel
Press the
5
/
∞
keys to select the desired track, then press
the [Sel] key.
6
When you connect a KENWOOD CD player (CD-425M, CD-4700M, CD-
4260M, DPF-J6030), you can display the CD TEXT data in the display of
the remote control unit.
1
Load the CD TEXT data to the CD player.
•"Text" appears when the CD TEXT data is read.
Before operation, regiser the setup code of the CD player.
1 Press the MUSIC key to select "CD".
2 Press the [Menu] key repeatedly until "SetUp" appears in the
display.
3 Press the 5/∞ keys to select "All Read" and press the [Enter]
key.
• The loading time may take a few moments.
Load the CD TEXT data of the CD player to the remote
control unit.
1 Press the MUSIC key to select "CD".
2 Press the [Menu] key repeatedly until "SetUp"s appears in the
display.
3 Press the 5/∞ keys to select "Disc Title" and press the
[Enter] key.
• The remote control unit starts reading the CD TEXT data (disc titles
are also read).
•
appears during reading.
2
3
•When "Text" does not appears, select "Track Title" in the
"SetUp" display and press the [Enter] key.
CD/DVD
Text Menu
CD
Press the [Home] key.
Getting the most from your remote control
Display operation 1
5/∞
Display operation 2
+
–
+
–
Displaying the CD TEXT data