Kenwood VR-409 Stereo System User Manual


 
20
Operations
Presetting radio stations manually
• Repeat steps 1, 2, 3, and 4 to store as many stations as necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.
Press the MEMORY key while receiving the station.
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
Blinks for 5 seconds Lights for 5 seconds
1
2
Tune to the station you want to store.
3
4
Receiving preset stations
Enter the number of the preset you want to receive (up to
"40").
1
2
Press the numeric keys in the following order:
For "15", press.......... 0,5
For "20", press.......... 0,0,)
• If you make a mistake entering a two digit number, press the +10 key
several times to return to the original display and start again.
Use the MULTI CONTROL to select one of the station
presets (1 – 40).
Press the MEMORY key to accept the setting.
Press the MUSIC key to select the tuner as the source.
AM
kHz
PRO LOGIC
3
DOWN MIX
DIGITAL
S.DIRECT
MONITOR
DSP
AUTO SOUND
LFE
C
SRSLS
TI.VOLB
CLIP MUTE
RDS EON PTY
TP TA NEWS
FM
MHz STEREO
AUTO
TUNED
ST.
MEMO
SW
RL
SP A
AM
kHz
PRO LOGIC
3
DOWN MIX
DIGITAL
S.DIRECT
MONITOR
DSP
AUTO SOUND
LFE
C
SRSLS
TI.VOLB
CLIP MUTE
RDS EON PTY
TP TA NEWS
FM
MHz STEREO
AUTO
TUNED
ST.
MEMO
SW
RL
SP A
MEMORY
MULTI CONTROL
MUSIC
Numeric keys
Listening to radio broadcasts
Receiving preset stations in order
(P.CALL)
• Each time you press the key, another preset station is received in
order.
Pressing the ¢ key does the following:
01=02=03= ...... 38=39=40=01=02=03=
Pressing the 4 key does the following:
01+02+03+ ...... 38+39+40+01+02+03+
Holding down the key, lets you skip through the presets, receiv-
ing each for 0.5 seconds apiece.
1
2
Use the MUSIC key to select the tuner as the source.
Use the
4
/
¢
keys to select the desired station.
4/¢
MUSIC