Filter
Top Products
32
EN
ENGLISH
Ambience effects
Convenient functions
Adjusting the sound
You can make further adjustments to the sound while listening to
playback in the surround mode.
MULTI CONTROL
DIMMERSTEREO
SOUND LISTEN MODE
STEREO
DIMMER
LISTEN MODE
%/fi
MULTI %/fi,
@/#
SOUND
SLEEP
1 Press the SOUND key and then use the ∧/∨ keys or MULTI @/#
keys until the desired item appears in the display.
Each time you press the
∧/∨ keys or MULTI @/# keys, the menu
changes as follows:
Note that some items are not displayed depending on speaker
settings and listening modes.
1 CNTR (Center speaker level adjustment)*
2 SR (Surround Right speaker level adjustment)*
3 SB (Surround Back speaker level adjustment)*
4 SBR (Surround Back Right speaker level adjustment)*
5 SBL (Surround Back Left speaker level adjustment)*
6 SL (Surround Left speaker level adjustment)*
7 SUBW (Subwoofer level adjustment)*
8 INPUT (Input level adjustment - analog mode only) ¡
9 MIDNIGHT
(Midnight mode ON/OFF - Dolby Digital and DTS mode
only)
0 PANORAMA (Panorama mode
ON/OFF
)**
- DIMENSION (Dimension adjustment)**
= CENTER WIDTH (Center width adjustment)**
~ CENTER IMAGE (Center image adjustment - Neo:6 Music mode
only)
! DUAL MONO (Dual Mono selection - Dolby Digital mode only)
* The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value when
the power is turned on/off.
** Pro Logic IIx Music and Pro Logic II Music mode only.
•If you have selected “SB NORMALx1” or “SB LARGEx1”, “SBR”
and “SBL” are not appeared but “SB” is appeared on the Display.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the
setting as desired.
•The adjustment item is displayed for approximately 20 seconds.
3 Press the SOUND key again to return to the input indication.
DVD 6-channel playback
Using a DVD player or the like equipped with six (5.1) output channels and
the receiver, you can enjoy surround sound playback.
Connecting a DVD player which can decode the surround signal itself is
also acceptable.
INPUT MODE
DVD/6CH
VOLUME
CONTROL
DVD/6CH
INPUT MODE
VOLUME%/fi
Preparations
• Connect your DVD player to the DVD/6CH jacks of the receiver.
• Turn on all other components that will be used.
• Complete “Preparing for surround sound”. &
1
Use the DVD/6CH key to select “DVD/6CH” as the input
source.
2
Select "6CH INPUT" by pressing the INPUT MODE key.
• If speaker system B is on when “6CH INPUT” is selected as the
input mode, it switches off and speaker system A turns on
automatically.
3
Start playback of the DVD software.
4
Adjust the volume.
• It is not possible to adjust the volume level or sound quality
(SETUP, SOUND, LISTEN MODE, ACTIVE EQ, STEREO, DSP
MODE, LOUDNESS and TONE key will not be functional) of the
channels separately when the receiver is in the 6CH INPUT mode.
Adjust the volume with the controls of the DVD player.
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer’s own volume control.
05.2.8, 0:02 PM32