Filter
Top Products
22
EN
ENGLISH
Normal playback
Recording
Recording audio (analog sources)
Input Selector keys
Input Selector
keys
Recording a music source
1 Use the Input Selector keys to select the source (other than “MD/
TAPE”) you want to record.
2 Set the MD or TAPE recorder to record.
3 Start playback, then start recording.
Recording video
1 Use the Input selector keys to select the video source (other than
“VIDEO 1”) you want to record.
2 Set the video recorder connected to VIDEO 1 to record.
• Select the REC MODE to record a digital input source.
3 Start playback, then start recording.
•Recording may not be normal for some video software. This is due
to the copy guard condition. ‡
One-touch low frequency emphasis (BASS BOOST)
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo modes.
Press the BASS BOOST key.
• Press the key once to select the maximum (+10) low frequency
emphasis setting.
• This key does not function when the receiver is in the sound quality
or ambience effects adjustment mode.
• This function is available only for speakers connected to FRONT A
terminals.
Switching back to the previous setting
Press the BASS BOOST key again.
Muting the sound
The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.
Blinks
L
SL S SB SR
C R
MUTE
AB CLIP
LFE
SP
To cancel
Press the MUTE key again so that the “MUTE” indicator goes off.
• MUTE ON can also be deactivated by turning the VOLUME CON-
TROL knob or pressing VOLUME %/fi keys.
ACTIVE EQ mode
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON.
Press the ACTIVE EQ key for the following selections;
1 ACTIVE EQ MUSIC : Effective when listening to music.
(The ACTIVE EQ indicator lights up.)
2 ACTIVE EQ CINEMA : Effective when watching movie.
(The ACTIVE EQ indicator lights up.)
3 ACTIVE EQ GAME : Effective when playing video game.
(The ACTIVE EQ indicator lights up.)
4 ACTIVE EQ OFF : The ACTIVE EQ function is turned OFF.
(The ACTIVE EQ indicator goes off.)
•
“ACTIVE EQ”
will scroll from right to left.
• ACTIVE EQ function will not be available when in REC MODE, or when
searching or presetting radio stations.
Listening with headphones
1 Connect headphones to the PHONES jack.
PHONES
• The sounds from all speakers are cut off.
2 Use the VOLUME CONTROL knob or VOLUME %/fi keys to
adjust the volume.
05.2.8, 8:26 PM22