30
CD-224M/DPF-J5010 (En)
NO IDCS
Periodic inspection
This unit incorporates an optical pickup which is a precision device.
It is recommended to have this unit inspected periodically to clear
the pickup after about 1000 hours of use, although this period may
vary depending on the installation condition (temperature, humidity,
dust, smoke, etc.) of the unit.
The unit has inspected, please consult your dealer or a KENWOOD
service center in your area.
Caution on condensation
Condensation (of dew) may occur inside the unit when there is a
great difference in temperature between this unit and the outside.
This unit may not function properly if condensation occurs. In this
case, leave the unit for a few hours with the power left ON, and
restart the operation after the condensation has dried up.
Be specially cautious against condensation in a following cir-
cumstance:
When this unit is carried from a place to another across a large differ-
ence in temperature, when the humidity in the room where this unit
is installed increases, etc.
Cleaning
Do not use volatile solvents such as alcohol, paint thinner, gasoline,
or benzine, etc. to clean the cabinet. Use a clean dry cloth.
Do not use contact cleaners because it could cause a malfunction.
Be specially careful against contact cleaners containing oil, for they
may deform the plastic components.
Note related to transportation and movement
Before transporting or moving this unit, carry out the following op-
eration:
1. Remove all discs from the carousel and close the door panel.
2. Confirm that the flashing “NO DISC” display has changed to steady
lighting, and then switch off the power.
3. Wait a few seconds, then disconnect the power plug.
Memory backup function
Stored contents for at least
3 weeks after power plug is
unplugged from the AC out-
let.
Power status (ON or OFF),
Title name registration contents
Music type registration contents
Best selection registration contents
Important items