Filter
Top Products
18
CD-224M/DPF-J5010 (En)
: Keys and controls used in the operations described on this page.
Programming tracks in desired order (PGM mode)
GP EREPTAO2DN0T3
GP EREPTAO2DN0T3
REPEAT
6
REPEAT
6
∞ DISC SKIP 5
Preparation
÷Load discs into the carousel. 0
Repeated playback
(REPEAT mode)
To repeat only the desired tracks
1Program the desired tracks by per-
forming steps 1 to 3 of “Program-
ming tracks in desired order”.
^
÷Up to 32 tracks can be programmed by repeating steps 1.
2Switch REPEAT ON.
3Start playback.
÷The current status is displayed when the key is pressed once. When it
is pressed while the status is displayed, the repeat ON status can be set
to OFF (or vice versa).
÷All of the programmed tracks will be repeated.
÷In case only one track is programmed, only that track will be repeated.
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON → OFF)
To repeat one selected disc
1Check that the unit is in the normal
play TRACK mode.
#
3Start playback.
Previous disc Next disc
Within 8 seconds!
2Select the disc number.
4Switch REPEAT ON.
÷The disc number can be selected directly by using the DISC SELECTOR
and numeric keys in place of the DISC SKIP keys.
For random repetition (
For music type repetition §
For best selection repetition •
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON → OFF)
÷The current status is displayed when the key is pressed once. When it
is pressed while the status is displayed, the repeat ON status can be set
to OFF (or vice versa).