Filter
Top Products
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing the Faceplate
1 Press the Release button.
Drop open the faceplate.
2 Drawing the faceplate to left side pull it to the front and
remove it.
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate in
its special storage case while detached.
• Do not expose the faceplate or its storage case to direct sunlight
or excessive heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
Reattaching the Faceplate
1 Align the shaft on the unit with the depression on the
faceplate.
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.
Theft Deterrent Faceplate
Turning the Non-fading output ON or OFF.
Press the [NF] button for at least 1 second.
Each time the button is pressed Non-fading output switches ON
or OFF.
When it’s ON, "NF ON" is displayed.
Non-fading Output
When you would like to cancel
Press the [MENU] button.
8 Exit the downloading mode
Press the [MENU] button.
• Do not operate this unit, while "Data Writing" is displayed, to
prevent data from being damaged.
• The number of files that can be downloaded.
- Downloaded movie: 1 file
- Wallpaper: 1 file
• When a new movie is downloaded, it is overwritten to the
currently downloaded movie.
Also, when a new wallpaper is downloaded, it is overwritten to
the currently downloaded wallpaper.
Note! There is no way to delete the downloaded pictures.
• The downloaded pictures can be used for display.
<Display switching part for "Display Type C" and "Display Type D">
(page 16)
<Wallpaper selecting> (page 18)
• When you can't download the pictures to this unit, there may be a
problem with the CD-R/CD-RW write method.
Refer to the URL
<http://www.kenwoodusa.com/division.jsp?categoryId=3>, and
rewrite the CD-R/CD-RW.
— 19 —