Filter
Top Products
44
|
English
Menu system
G-Analyzer Horsepower Analysis
This measures the horsepower and displays graph
and max power. It automatically saves the highest
record.
• Do not use G-Analyzer Horsepower Analysis on the
Public roads.
• Do not use this product in any way that prevents you
from driving safely.
• Follow all driving laws and use common sense when
using this product.
• Before alternating G-Analyzer Horsepower Analysis,
you are required to setup <G-Analyzer Horsepower
Gauge setup> (page 43).
1 Select the G-Analyzer Horsepower Analysis
mode
Push the Control knob towards [FM] or [AM].
Select the "Horsepower" display.
2 Enter G-Analyzer Horsepower Analysis
mode
Press the Control knob for at least 1 second.
"Stop" is displayed.
Previous max power and record are displayed.
3 Begin measurement
Press the Control knob.
"Ready" is displayed.
4 Start the car
"Measure" is displayed.
After 15 seconds of measurement, the result is
displayed.
Display the result
The graph shows the variation in horsepower
between 0.1 to 15.0 seconds. The maximum
power is displayed in red and the markings
provided at intervals of 5 seconds are displayed
in blue.
• Pressing the Control knob also begins the
measurement. To prevent danger, push the control
knob before starting the car.
5 To display the maximum power in the
section:
Push the Control knob towards [4] or
[¢].
Each time you push the Control knob, the
maximum power in the section is displayed.
6 Exit G-Analyzer Horsepower Analysis mode
Press the [NEXT] button.
• Like your vehicle’s speedometer, G-Analyzer is no
more than a measuring function. The HP or G value
measured by this unit may not be completely accurate
due to its simplified method of measurement. The
G-Analyzer is only for reference and should not be
used to confirm the horsepower specifications of your
vehicle.
• Measuring after starting the car lowers the accuracy.
• The record will not be renewed if the measurement is
discontinued.
• The graph’s scale adjusts automatically to the
horsepower value.
• The value of max power and record can be reset by
<G-Analyzer Reset> (page 42).
Function of the KDC-X790
In Standby mode
G-Graphic Select
Select the picture to display on G-Graphic.
Display Setting
"G-Graph : Default" Display default picture.
"G-Graph : Custom" Display downloaded picture.
• G-Graphic pictures cannot be selected unless
downloaded beforehand. To download G-Graphic
pictures, refer to <Picture downloading> (page 49)