Filter
Top Products
English
|
7
Category Item Setting Entry Setting overview Condition Page
“Audio Preset”
1 sec.
Presets the setting value of the audio control. The preset
value is retained after resetting.
20
“DEMO Mode” “OFF”/ “ON”* 2 sec.
Specifies whether to enable demonstration.
—17
DISP > TYPE A/ B/ C/ D/ E/ F/ G
Sets the display pattern.
—8
> GRAPH
Spectrum Analyzer 1 – 2
Sets the Type E spectrum analyzer display.
‰
> SIDE Text icon/ Source
icon
Sets the Type A side icon display.
Å
> TEXT
Sets the text display.
ÅıÇÎ
Ï
9
K-COL*
1
*
2
Sets the button illumination color.
10
P.MEM
Presets a station.
13
SCAN “ON”/ —
When set to “ON”, plays the intro of the music in the folder
successively.
RDM “ON”/ —
When set to “ON”, plays the music in the folder randomly.
FiREP “ON”/ —
When set to “ON”, plays the music repeatedly.
FoREP “ON”/ —
When set to “ON”, plays the music in the folder repeatedly.
SCAN “ON”/ —
When set to “ON”, plays the intro of the music on the disc
successively.
RDM “ON”/ —
When set to “ON”, plays the music on the disc randomly.
M.RDM “ON”/ —
When set to “ON”, plays the music in the disc changer
randomly.
T.REP “ON”/ —
When set to “ON”, plays the music repeatedly.
D.REP “ON”/ —
When set to “ON”, plays the music on the disc repeatedly.
Next page 3
*Factory setting
* Function of KDC-W6541U.
* Function of KDC-W6641U.
* Function of KDC-W6041U.
* Function of KDC-W6141U.
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB/iPod.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set while CD/ Disc changer source.
: Can be set while Disc changer source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set for sources other than the standby
source by setting “2 ZONE” of <Audio Setup> (page
18) to “ON”.
: Sets “ILM MSC SYNC” and “AT COL CHG” in the
menu to “OFF”.
: Refer to the reference page.
Å–Ï : Can be set when the specified type is selected for
Display Type.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
• “ILM MSC SYNC” is displayed when “MENU” > “AT COL
CHG” in <Function Control> is set to “OFF”.