Filter
Top Products
English
|
27
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
P.CONT
ANT.CONT
MUTE
LR
LR
REMO.CONT
AUX
Connecting Wires to Terminals
Battery wire (Yellow)
Ignition wire (Red)
Wiring harness
(Accessory1)
If no connections are made, do not
let the wire come out from the tab.
Power control/ Motor antenna
control wire (Blue/White)
TEL mute wire (Brown)
Connect either to the power control terminal
when using the optional power amplifier, or to the
antenna control terminal in the vehicle.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Fuse (10A)
⁄ See next page.
FM/AM antenna input (JASO)
Steering remote control (Light Blue/Yellow)
To use the steering wheel
remote control feature, you
need to an exclusive remote
adapter (not supplied) matches
your car is required.
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
⁄
To connect the Kenwood navigation system,
consult your navigation manual.
Front output
Rear output/ Sub Woofer output
USB connector (1m)
To USB device
Rear output/ Sub Woofer output
⁄
Do not remove the cap when you do not use the USB cable. The connector
will cause the unit to malfunction if it gets in touch with any metallic part of
the vehicle.
KDC-W6041U/ KDC-W6141U
KDC-W6541U/ KDC-W6641U
To Kenwood disc changer/ External optional accessory
⁄
To connect these leads, refer to the relevant instruction manuals.
AUX input (Stereo)
Use the mini-plug which is stereo type and does not have any resistance.